中文
EnglishWhat are the requirements for the installation of fireproof glass windows
1. Inspection conducted
The problems to be checked include whether there are deformation, damage and other phenomena, and whether all the accessories of fire-proof glass windows are available and qualified, and the window sash can not have any warpage. If damage is found, it should be corrected before it can be used normally.
2. The front, back, left and right of the fire-proof glass window must adhere to a certain viewpoint
The viewpoint is generally 90 degrees, which can be proofread with a level ruler or through the hanging line method. The requirements are horizontal and vertical, and the requirements on the same horizontal line are the same.
3. The window frame shall be connected with the surrounding buildings
The fireproof glass window frame needs to be connected with the surrounding buildings into a whole, and the connecting accessories can be wood or iron. After the installation of the steel window frame is completed, the gap between the window frame and the building shall be filled with cement mortar, and it can be used only after a period of maintenance, which is generally more than 24 hours.
Article source: fireproof glass window http://m.wan-xin.net/
-
05-04
What are the problems of composite fireproof glass in fire fighting
Some supervisors mistakenly think that the door made of fireproof glass is the fireproof door, the partition made of fireproof glass is the fireproof glass partition, and the window made of fireproof
-
04-12
Fireproof glass door: how to ensure that the fireproof door can play a role in critical times
How to ensure that the fire door can give full play to its ideal effect in critical time?1. Select appropriate typesAccording to the relevant specific introduction of fire doors, we can know that at t
-
02-17
Where is the fireproof glass generally installed
(1) the fireproof glass is generally installed on something. It may not be checked from time to time before installation. If the warpage, unsightness and glass hazards of the window edge and window ar
-
10-30
How to distinguish the quality of single fireproof glass?
1. Equipment conditions:No matter how to make a single piece of fireproof glass, it can't be done without some equipment, so if the manufacturer doesn't have the equipment, it can't mak